Lyntec RPCM Manual do Utilizador descarregar pdf (Página 21)

139-0498-01.21 21

Chapter Five--Control Setup

5. Select a breaker to add to the zone by clicking on the

breaker you want to add. Only motorized breakers

(indicated in green) may be added to zones. (Figure 5-10)

6. Select the position of the breaker in the zone. This set

the order in which they turn on and o . Or in the case

of DMX or sACN, the address order. (Figure 5-11). Note:

DMX and sACN zones default to individual addressing.

If you choose “All Available” the entire panel or panels

will change to DMX or sACN.

7. For sequenced operation, select a delay time from

the dropdown. Breakers in grouped zones toggle in

25ms intervals. (Figure 5-11) Delay time is the amount

of time after a breaker changes state, before the new

breaker in sequence changes state.

Figure 5-10

Click on the green oval

to add a breaker to a

zone.

Figure 5-11

Click the up/down

arrows to change the

breaker’s position/

address in the zone.

Select a delay time for the

breaker.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 36 37

Sem comentários

Lyntec RPCM Manual do Utilizador Página 21